hpS-Installation Instructions

info@eco-nex.com
Basic hpS eco non chemical water treatment installation instructions                         

In Circulation - to remove/control harmful microbes either planktonic or in bio film.

This is the simplest method of installing the hPS unit for a stored water system.  The units will provide water treatment of between 2-50 cubic metres per hour.  Each unit will use the patented cavitation process to destroy microbes.  There are no moving parts within the unit to go wrong.  Each unit is built from high quality stainless steel, to keep destroying microbes such as legionella, over and over again.

General

The Hydro-Physical-SYSTEM is integrated in existing circulations to prevent/control legionella and harmful microbes (i.e. cooling water circulations etc.) If this is not possible, a dedicated treatment circulation has to be created (i.e. treatment tank). For an optimal operation it is very important that a constant water volume flow and pressure of (approx. 5,0 to 7,0 bar) is available for the operation of the unit.

The treated water passes through an outlet pipe (4) with approx. -0,8 to -1,0 bar out of the Hydro-Physical-SYSTEM. A free outlet of the treated water has to be provided, a reduction of the predetermined nominal width of the pipe may not be undertaken, i.e. filter units, non-return valves or similar. Further more it is to be pointed out that only long bows are being used. The outlet pipe has to end above the water surface. The integration of the AQUA HP-SYSTEM into a closed water circulation is an exception.

Materials to be applied:
For pipes (1), (4) and fittings (3) commercially available parts for the pipe installation have to be used (depending on the available pressure - see pump capacity). The pump (2) has to be chosen according to the recommendation of the pump manufacturer. This can be requested as part of the delivery.